Information

place and don't use camphor
to reduce humidity air.
Because benzoin could shorten
the age of the material’s that
was made from rubber but also
shortened the PCB age theplace
chip and the digital camera
component was stuck.

To avoid the matter above,
better for the place of
the special airtight but cool
storage, dry and not clammy.
must be remembered by air
humidity also really
influenced the age of the componentin the camera.
For that you must add Silica Gel as the humidity absorber.

Reduce contact with the sun, direct contact with the sun
indeed was difficult to be avoided, then better give the
special protection could like the bag of the camera.
Better should not too much often carried out photography
against the sun rays, if could far away. This could make
the age of the sensitive digital camera censor the light
could decrease in fact immediately could be broken.

Avoid the jolt, when the digital camera was brought went
on a trip, certainly the jolt could not be avoided, better
use the special place for the camera, because the special
bag of the camera had the attenuation that could reduce
the jolt.

For the camera pocket better give the attenuation of the
addition to his place,usually the camera pocket only was
supplied the bag of the pocket.Bought the special bag for
the camera pocket you and gave few attenuation inside.

Cleaned the lens, for the user of the digital camera the
kind pocket, you could clean the camera lens tohis exterior
only. Cleaned with clean dry cloth and not curt.For the
professional camera could be cleaned to the interior lens
and this must be carried out with the careful. The use
blowerthat often was sold camera store. As a couple blower
also could the measuring probe 1/2 inch that had never been
worn to the object or the need other.When the lens was
affected by the stain like water, oil or the finger, used
tissue especially for the camera that often was sold in
outlet.Tissue especially this was good enough because
would not be the scratch.

Avoid the sprinkling of water, when you vaction on the
water tour, better have a careful with the sprinkling water.
Moreover when the sprinkling of water sea during the tour on
the beach,could be able to your camera at once experienced
damage seriously. Sea water was the main enemy of the objects
that was made metal, moreover for the digital. camera moreover
for the professional digital camera, certainly the element
metal was gotten in bodi him really a lot of. The sprinkling
of soft sea water could often appear and become the source
of rust that really profesional. When your camera fall to sea
water or sprinkling that enough to anticipate, should not
postpone again,immediately took his battery and rinsed with
fresh water. Furthermore hydrate with the hair dryer. Before
lighted confirmed the condition for this digital camera
was dry.